|
|
Flat House
Jakubčík, Lukáš ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
This bachelor´s thesis deals with the design of detached apartment building in Mikulov. The apartment building is set into the sloping terrain of the town of Mikulov and consists of one basement and four above-ground floors. From the first to third above-ground floors two residential units with balconies are designed, on the top fourth floor is one spacious residential unit with access to the outdoor terrace. The floors are serviced by a staircase supplemented by an elevator in a separate elevator shaft. The building uses a structural system of ceramic parts for vertical and horizontal structures, part of the foundation structure is made of lost formwork. The roof of the building is warm flat roof. The bachelor´s thesis contains project documentation for the construction.
|
|
|
Pension for the elderly
Nykodým, Petr ; Třeštíková, Jana (referee) ; Berková, Petra (advisor)
The subject of my diploma thesis is the design documentation for the pension which is designed for the elderly and will be supplemented with a specialty from the air-conditioning branch. The building is situated in the western part of the town Bystřice nad Pernštejnem and it's located at 3058/3 about the total area of 8315,2m. The total footprint of the suggested building is 1161,2 m. The subject has got an irregularly-shaped floor plan. It is made of three subsequent triangels, it has got three above-ground floors with partial basement. The roof of the building is suggested as a warm flat roof with coating insulation. The structural system of a building is designed as longitudinal with shear walls. The exterior building masonry is suggested from sharpened clay blocks Heluz STI 40 with thickness 400 mm. The contact thermal insulation system ETICS with an insulant from EPS with thickness 100 mm is designed for all building. The building for the elderly is from its bigger part meant for citizens who are older than 65 years in the flats for one or two persons in 2FLR and 3FLR. The space for essential services to the residents is located on the 1st FLR. There are also a cafe and a surgery located in a smaller part of the 1st FLR, which are to be used both by the residents and the public.
|
|
|
Detached house
Urban, Kamil ; Hlavsa, Petr (referee) ; Kolář, Radim (advisor)
The topic of this Bachelor thesis is an elaboration of technical documentation for a project of new family house. The house is partly a basement and it has two floors. The building is designed with traditional building materials. Part of this thesis is also includes a seminar work on Single-layer flat roofs.
|
|
|
Family house in a slope
Vlach, Ondřej ; Šuhajdová, Ing Eva (referee) ; Šuhajda, Karel (advisor)
The aim of bachelor’s thesis is to design a family house in a slope.. The house is designed for 4 to 5 family members in the town of Polná near Jihlava. The shape and height position of the house is adapted to vertical alignment of the ground. It is designed as three-storey house including a partial underground storey. The one car garage is next to the house and shares one common wall with it. The main entrance is in the first floor from the street of Na Podhoře. The main residential rooms are situated to the south side of the house. Vertical constructions are made of ceramic blocks and the underground floor is made of concrete blocks. The horizontal constructions are made of girders and ceramic blocks. The staircase is made of reinforced concrete. The roof is one-face flat roof. The facade makes contrast with white plaster and dark plaster in the perimeter.
|
|
| |
|
|
Ballroom Dance Club in Frenstat pod Radhostem
Hazuková, Jarmila ; Kalánek, Jiří (referee) ; Kolář, Radim (advisor)
The subject of this project documentation for building is new building of Ballroom dance club in Frenštát pod Radhoštěm conected with current building of cinema. Object is situated in Frenštát pod Radhoštěm in region of Nový Jičín. The target of this diploma thesis was design of public building for cultural enjoying with using current spaces in the locality to fulfill requirements of investor. The thesis is devided into parts of preparing, situating, documentation to be involved into the surrounding.
|
|
|
Multifunctional house
Blaha, Ondřej ; Janík, Zdeněk (referee) ; Kalousek, Miloš (advisor)
This final thesis deals with a project documentation of a new multifunctional building. The building is located in Žďár nad Sázavou, in the Neumannova street. The building is divided into residential units and areas for a small company and a shop. The house is projected as a detached building with a partial basement and three floors. The residential part has 8 apartments in total – four apartments with three bedrooms, one with two bedrooms and three with one bedroom. It includes also cellars belonging to the apartments. The non-residential part includes space for a shop and an administrative part consisting of a reception, a meeting room, offices, stores and sanitary facilities. The main entrance in to the residential part is located on the level of staircase half landing. Main entrances into the non-residential parts are on the level of the ground floor. The house dispose with 24 parking places, two of them are dedicated for drivers with disabled parking permit. The building is based on concrete strip foundations. The external load-bearing structures are walled with clay masonry in the floors and with permanent formwork in the basement. The ceiling structure is formed with prestressed floor slabs. The house is covered with a warm flat roof. The staircase is pre-fabricated. In the thesis, there was put a stress on the appropriate dispositional, structural, technical and architectural design and on the safety in the use of the building. The drawing documentation is processed in the AutoCAD.
|
|
|
Hotel Wipeout with wellness
Večeřová, Gabriela ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The thesis is dealing with the proposal and processing of project documentation of the Wipeout hotel with the wellness. The proposed object is located in the uptown of Jedovnice. It is a four-storey basement building with vegetation roof and five pitched gabled roofs. The object is visually divided into two parts. The first part is covered with a chipped stone facade. The second part is covered with ventilated facade of wooden blocks of Nordic pine. The foundations of the building are reinforced concrete. Framework, peripheral and dividing walls are designed from POROTHERM system. Ceiling structures are reinforced concrete. The visual idea is the Nordic style, that fits into the surrounding landscape. The object consists of three operating parts namely a restaurant, wellness centre and temporary accommodation.
|
|
|
Detached house with design office
Doležal, Petr ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
The object of this bachelor thesis is to elaborate a project documentation of a detached house with a design office. This is a two-storey brick building with a partial basement, which is in a flat terrain. The roofing over the second floor is designed from the single-shell roof. The building is designed in the system Porotherm. The process layout allows a comfortable living for a family with 4-6 members. The design office is for 6 workers
|
|
|
Detached house with an establishment
Zajícová, Dagmar ; Julinová, Patricie (referee) ; Utíkalová, Ivana (advisor)
This bachelor's thesis deals with designing a project of the family house with the space for the dental surgery. The house is in developing area situated to the south of the centre of village Babice at Uherského Hradiště where there is going to be a housing construction. The object is projected as two-floor with parcial basement detached house for four members of the family. Dental surgery is designed for one dentist and one assistent. In the northwest part there is also a car park with a capacity of three places for patients and one place for disabled people. The main residence are in the southeast and southwest. Constructional system of this house is combined. Supporting system is comprised with blocks of autoclaved aerated concrete. Horizontal construction is made of monolitic reinforced concrete ceiling plate. The object is covered by flat roof. The project was made thanks to computer program AutoCAD 2018 by the company Autodesk. The author of this thesis put emphasis especially on right process layout, architectonic layout, construction requirements and statical requirements.
|
guest ::
